14489
MRL Main Header Line (Scope 1)  SOW-5537421830-082024
Cleanaway Waste Management Ltd
Melbourne Regional Landfill
1100-1152 Christies Rd, Ravenhall, Victoria 3023 Australia

Complete
450mm Main Header Line

Run Energy will:

  • Trench, weld and lay main header line
  • Weld and lay main header line
  • Install air and leachate riser manifolds
  • Install knockout pots
  • Install isolation valves 
  • Install in accordance with attached design drawing

Details:

Item Quantity/Size Installation Notes General Arrangement Drawing Reference
Main header line 1,010 m x 450 mm PN10 Weld and lay on landfill surface  N/A
Main header line 100 m x 450 mm  PN10 Trench, weld and lay into  knock-out pot inlets on a minimum 2% grade N/A
Knockout pots 5 x 560mm PN10
  • Install in low points of the 450mm main header to collect condensate
  • Install pumps in knock-out pots

 

 RE-LFG-009 Offset Knockout Pot
Air & leachate riser manifolds 5 x 63 mm PN16
  • Install at the five knock-out pots and connect into existing air and leachate lines
 RE-LFG-143 Air and Leachate riser Manifolds
Isolation valve 3 x 400 mm gear box
  • Install at designated locations along the header line
 N/A
Future Connection Tees 4
  • Install 4 x 450mm tees c/w valve for future connection to header lines
  

 Note     

  •  It is assumed the 450mm will run through the existing culvert under the haul road 

 
  • No variations
Horizontal Well Connections - Provisional

Run Energy will:

  • Weld and lay flow line
  • Install meter run wellheads 
  • Install in accordance with attached design drawing

Details:

Item Quantity/Size Installation Notes General Arrangement Drawing Reference
Flow line line 140m x 90 mm PN10 Weld and lay on landfill surface N/A
Meter run wellheads 12 Install at locations for horizontal well connections RE-LFG-079 Meter Run Wellhead
  • No variations
No. Description Scheduled Billing Milestone Complete Complete is checked in the LFG Construction Daily Log
1   Yes  
2    
3    
4    
5    
6    
7    
8    
9    
10    
 
Date Issued
Equipment Type
Equipment Serial ID
 
No Record records found
 
Date
Team Lead
Work Summary
 
No Daily Log records found
Yes
 
Date
Site Name
Type
Title
Run Job Number
CQA Report
Job Number
Drawing
 
No Drawing records found
No
Yes
No
The search criteria for this report references restricted fields.
No
Craig Gowar
Dean Wilson
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.