Richard Andrews
14009
W5-8 Gas 31-JAN-2024
299374.43 5815800.46 98.6
36.00 30.30
29.80
6.2
200 16
1.50
0.5
Yes
Seal Types
Clay/Bentonite N/A Butt Welded
Depths are measurements of Metres Below Ground Level (mBGL) - Ground Level = 0
0.00 4.50 4.50
4.50 29.80 25.30
0.00 4.00 4.00
4.00 29.80 25.30
08-12-2023 12:00 AM

Safe drill depth form approved by Hamid. SafeDrillDepthForm_stage 5_Rev1-FA 23 12 08 CWY.xlsx

Hi Hamid,

 

As discussed could i please get your written approval to cut and install well W5-8 to 30m. Proposed depth was 36m but due to obstructions in hole and potential damage to drill rig we were unable to reach that depth.

 

Thanks Richard. 

 

Approved. 

 

 Kind Regards

 

Hamid
Add  Waste
 
Interval
Start
(mBGL)
Interval
End
(mBGL)
Waste Stream
Other
Photo Thumbail
 
Melbourne Regional Landfill - W5-8  (7 Waste records) 
0 2 Capping Material    
       
2 12 Other Dry well compacted waste, plastics, plaster, clay at 6.5m.  
7 8 Other Obstruction. Major problems on this hole something sticking out of the sidewall or collapsing around the bar causing it to jam up and also blocking the rock from going down the hole.  
12 21 Other Extremely compacted dry waste, plastics, bundles of electrical cable, buckets. Clay at 14m and 18m.  
21 28 Other Dry waste, plastics, household. Clay at 22m.  
28 30.3 Other Moist waste, plastics, wire.  
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.