30-SEP-2020
Richard Andrews
12197 Erskine Park Landfill GCS Modification Erskine Park Landfill
Continue exposing header line, getting very deep and close to main exit rd.
Pull out coils and lay 90mm leachate from KOP to well 10, tie in new leachate line to existing.
Install risers at barra trap.
Make J trap, expose flow line at well 10, trench weld and lay flow line from header to well 10, dig and install J trap. Tie in.
Trench past E station and up to 2nd rd crossing near G64.
Build pad for E station, expose flow lines and trench up to new pad.
Expose E station.
Expose header near flare, header not adding up with drawing provided.
Clean up around well 10.
Cut and cap header, sort out whats going on with header line.
Relocate header and E station.
Installation
 
Log - Site Name
Daily Log Date
Item
Size (mm)
Quantity/Length
(no. or m)
 
No Item records found
Milestones
Mobilise & receive materials (Payment 15%)  
Excavate & remove Main Header Line 612m x 315mm  
Trench & install Main Header line 640m x 315mm (payment 45%)  
Trench & install Lateral Header line 10m x 160mm  
Remove and reinstall Air Line 640m x 63mm  
Remove and reinstall Leachate Line 640m x 63mm  
Well Station  E - relocate  
Well Station D - relocate Yes  
J-Traps install 12 x 90mm  
V01-03, GPS & Clean up site (Payment 40%)  
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.