26-AUG-2021
Andrew Keys
12498 MRL Horizontal Well Installation Melbourne Regional Landfill
1) Disconnected the air and Leachate discharge line on the Leachate sump
2) Removed pump from the sump (please note the pump was hanging at 14m)
3) Extended the leachate line, control cable, air line etc to allow us to raise the sump casing
4) Raised the 225mm sump 3m
5) Raised the conduit housing the air and leachate lines 3m
6) Carted in fill and made mound around the sump to hold it straight and to gain access to re install the pump
7) Installed pump at 17m and fitted off
Cut down monitoring bore,  excavate and install bentonite, concrete lid in
Installation
 
Log - Site Name
Daily Log Date
Item
Size (mm)
Quantity/Length
(no. or m)
 
No Item records found
Milestones
Delivery of materials - PM1 Yes  
Horizontal Wells - 705m x 90mm Trench & Lay Yes  
Flow lines - 50m x 90mm Trench & Lay Yes  
Flow lines - 150m x 90mm Lay Yes  
Meter Run - 5 x 63mm Yes  
GPS / clean up - PM2 Yes  
Variation 1 - Repair Well U487 Flowline Yes  
Variation 2 - Stage 1 - Clean up Yes   Works complete as of 2.00pm 19/08/21
Variation 20 - LS02 Raise Yes   Completed 6/08/21
Variation 21 - Monitor Bore GM24     
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.