05-MAY-2023
Richard Andrews
13125 Gipps Street Landfill Gas Barrier Blanket Gipps Street Reserve
RA fly to Sydney then Uber out to Eastern creek to collect vehicle.
Print off drawings, load vehicle up with tools needed for job. Load up bentonite and water cart.
Drive to Gipps st arrive 12:30. Get Dave inducted, there was some issues with the online induction so took awhile. 
Go up and have a look at where new trench needs to go and access. Receive 8t excavator.
Northern and Southern anchor trench there is only 1.6m gap between piles and cut out out, we will need to use a 1t excavator to fit between.
Western anchor trench there is not enough fill outside the piles. I will need to use spoil from previous trench to build out and then trench with 1t excavator. Also Glascott need to put a drain in next to the tank.
Eastern anchor trench there is only 600mm gap in some places between pile and cut out, 1t excavator will not fit so cut out will need to be extended. Scott mentioned contactors on site may be able to help with that.
Gather paper work and pre start excavator so Scott can induct machines.
Unload bentonite out of vehicle.

8t excavator not on hire list for selection.
Pick up 1t excavator from coates.
Get machines inducted and start on anchor trench.
Installation
 
Log - Site Name
Daily Log Date
Item
Size (mm)
Quantity/Length
(no. or m)
 
No Item records found
Milestones
Anchor Trench - 160m x 500W x 400D Yes  
Horizontal Well - 350m x 90mm Yes  
Flow Line - 135m x 90mm Yes  
Vent Stack - 2 off Yes  
Scope 2: A84 Bidim - 1,460m2 x 1 layer & 1,200m2 x 2 layers  
HDPE Liner - 1,200m2 x 1 layer Yes  
Screw Pile Boots - 40 off Yes  
Flow line Boots - 2 off Yes  
Variation No.11353 - Interruption to Project Yes  
Variation No.11362 - Greentech Consultancy  
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.