09-FEB-2021
Richard Andrews
12103 MRL Stage 3 & 4 Landfill Gas Collection and Control System Melbourne Regional Landfill
Fill out JSA for sump raise, go to boral and fill out permits.
Transport concrete collar to work area.
Remove lid from LS01 and extend 90mm pipe going into sump.
Raise concrete sump 2.6m and reinstall lid.
Make pump and install in sump to 8.6m
Make bund around KOP in hanson land.
Drag pipes up to well station 3b.
Pin 160mm header.
Connect pump and tie in air and leachate.
Reconnect 2 wells requested by Kate.
Finish off connecting wells in stage 1.
Installation
 
Log - Site Name
Daily Log Date
Item
Size (mm)
Quantity/Length
(no. or m)
 
Melbourne Regional Landfill 09-FEB-2021 Other   1
Melbourne Regional Landfill 09-FEB-2021 Other 1200 2.6
TOT         3.6
Milestones
Payment schedule - progress claims Yes  
Var. 01: Raise Pads around wells  
Var. 02: Air & Leachate to LP29 & 30  
Var. 03: Leachate line repairs Yes  
Var. 04: Install 16 x Bubbler tubes  
Var. 05: Leachate spill Yes  
Var. 06: Raise 4B well station by 3.5m and protect main header line  
Var. 07: Leachate cleanup  
Var 08: Lengthen Flowlines to Ease Flex  
Var 09: Review MRL EPA Works Approval  
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.